Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2021 >> CX-9 Signature >> Repair and Diagnosis >> Transmission >> Automatic Trans >> On-Board Diagnostics - Automatic Transaxle >> DTC P0716-00: Turbine/Input Shaft Speed Sensor Range/Performance Problem (TCM) >> Notes

DTC P0716-00: Turbine/Input Shaft Speed Sensor Range/Performance Problem (TCM): Notes

DTC P0716:00 - TCM DETECTION CONDITION AND POSSIBLE CAUSE

DTC P0716:00 Turbine/input shaft speed sensor range/performance problem
DETECTION CONDITION
  • Under the following condition, the turbine/input shaft speed is 9, 000 rpm or more for 1 s:
    • Battery voltage is 8 V or more.
FAIL-SAFE FUNCTION
  • Set to TCC control.
  • Inhibits learning control.
  • Inhibits manual mode.
  • Inhibits neutral idle control.
  • Inhibits AAS.
  • Inhibits 5GR and 6GR.
  • Inhibits shift down when the accelerate or pedal is depressed.
POSSIBLE CAUSE
  • Turbine/input shaft speed sensor malfunction
SYSTEM WIRING DIAGRAM Not applicable
scientia non olet · About Mike's Workshop Manuals