Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2021 >> CX-9 Signature >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Electric Power Steering System) >> Steering Wheel And Column Removal/Installation >> Steering Column Component Removal Note

Steering Column Component Removal Note

WARNING: This page is about a different car, the 2017 Mazda CX-9. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Always lock the adjusting lever to prevent damage to the steering column. In addition, do not unlock the adjusting lever until after the steering column installation is completed.
  • If the steering column is removed, remove it according to the procedure to prevent damage to intermediate shaft that could result if the steering column is removed in the incorrect order.
  1. Lock the adjusting lever.
    Fig 1: Locking Steering Column Adjusting Lever
    G11438901Courtesy of MAZDA MOTORS CORP.
  2. Remove the joint bolt.
  3. Disconnect the intermediate shaft from the steering gear (pinion shaft).
  4. Remove the nuts, and then remove the steering column component from the dashboard member.
scientia non olet · About Mike's Workshop Manuals