Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2021 >> CX-9 Signature >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Automatic Transaxle Shift Mechanism) >> Automatic Transaxle Shift Mechanism Removal/Installation >> Selector Cable Removal/Installation >> Cable Outer End (Transaxle Side) Installation Note

Cable Outer End (Transaxle Side) Installation Note

WARNING: This page is about a different car, the 2017 Mazda CX-9. However, it is still accessible from the selected car via links, so may be relevant.
  1. Assemble the cable outer end (transaxle side) to the bracket so that the marking is in the area of the arrow shown in the figure.
Fig 1: Checking Cable Outer End (Transaxle Side) Marking Area
G11441244Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals