Using center display
WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
- Switch the ignition ON (engine off or on).
- Select [Applications] on the center display.
- Select [Oil Change] on the center display.
- Select the following items and change the setting.
| Display of center display | Function | Initial setting | Setting contents | Control unit |
|---|---|---|---|---|
| Oil Life | Oil life to oil inspection/replacement can be displayed. | 100% | - | Connectivity master unit (CMU) |
| Reset | Maintenance monitor setting can be reset to the initial value. | Back | Back/Reset | Connectivity master unit (CMU) |
NOTE:
- Oil deterioration determination is displayed in the center display only when the "Change setting" for the "Engine Oil Maintenance Monitor" is set to "ON" using the M-MDS.