Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2021 >> CX-9 Signature >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Charging System) >> Generator Disassembly/Assembly [SKYACTIV-G 2.5T] >> Brush Disassembly Note

Brush Disassembly Note

WARNING: This page is about a different car, the 2017 Mazda CX-9. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Melt the solder quickly, otherwise the diodes (rectifier) and brush holder will be damaged by excessive heat.
Fig 1: Caution - Melt Solder Quickly, Otherwise Diodes (Rectifier) And Brush Holder Will Be Damaged By Excessive Heat
G11436020Courtesy of MAZDA MOTORS CORP.
  1. Melt the solder and remove the brush from the brush holder.
scientia non olet · About Mike's Workshop Manuals