Diagnostic Procedure
WARNING: This page is about a different car, the 2017 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
DTC B0072:55/B1228:55 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM - US/CANADA SPEC.)] - DIAGNOSTIC PROCEDURE
| Step | Inspection | Action | |
|---|---|---|---|
| 1 | PERFORM SAS CONTROL MODULE CONFIGURATION (AS-BUILT DATA USE)
|
Yes | Go to the next step. |
| No | DTC troubleshooting completed. | ||
| 2 | INSPECT LAP PRE-TENSIONER SEAT BELT INSTALLATION CONDITION
|
Yes | Go to the next step. |
| No | Correctly install the driver or passenger-side lap pre-tensioner seat belt. (See FRONT SEAT BELT REMOVAL/INSTALLATION
.) Then go to the next step. |
||
| 3 | PERFORM SAS CONTROL MODULE DTC INSPECTION
|
Yes | Repeat the inspection from Step 1.
|
| No | DTC troubleshooting completed. | ||