Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2021 >> CX-5 Signature >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (On-Board Diagnostic - Standard Deployment Control System) >> Clearing DTC [Standard Deployment Control System] >> ODDTC Self Test

ODDTC Self Test

WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the M-MDS to the DLC-2.
  2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
    1. Select "Module programming".
    2. Select "Programmable Module Installation".
    3. Select "RCM".
  3. Verify the DTC according to the directions on the screen.
  4. Press the clear button on the DTC screen to clear the DTC.
  5. Switch the ignition to off.
  6. Switch the ignition to ON (engine off or on) and wait for 11 s or more  .
  7. Perform DTC inspection. (See DTC INSPECTION [STANDARD DEPLOYMENT CONTROL SYSTEM] .)
  8. Verify that no DTCs are displayed.
scientia non olet · About Mike's Workshop Manuals