Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2021 >> CX-5 Signature >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (On-Board Diagnostic - Front Body Control Module (FBCM)) >> DTC U053B:68 [Front Body Control Module (FBCM)] >> Diagnostic Procedure

Diagnostic Procedure

WARNING: This page is about a different car, the 2017 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
DTC U053B:68 (FRONT BODY CONTROL MODULE) DIAGNOSTIC PROCEDURE

Step Inspection Action
1 VERIFY FRONT BODY CONTROL MODULE (FBCM) DTCs AGAIN Yes Go to the next step.
No Go to Step 5.
2 VERIFY FORWARD SENSING CAMERA (FSC) DTCs Yes Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.
(See DTC TABLE [FORWARD SENSING CAMERA (FSC)] .)
No Go to the next step.
3 PERFORM DTC INSPECTION AND VERIFY FORWARD SENSING CAMERA (FSC) MALFUNCTION Yes Replace the forward sensing camera (FSC), then go to the next step.
(See FORWARD SENSING CAMERA (FSC) REMOVAL/INSTALLATION .)
No Go to Step 5.
4 VERIFY THAT REPAIRS HAVE BEEN COMPLETED Yes Replace the front body control module (FBCM).
(See FRONT BODY CONTROL MODULE (FBCM) REMOVAL/INSTALLATION .)
Go to the next step.
No Go to the next step.
5 VERIFY IF OTHER DTCs DISPLAYED
  • Are any other DTCs displayed?
Yes Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.
(See DTC TABLE [FRONT BODY CONTROL MODULE (FBCM)] .)
No DTC troubleshooting completed.