DTC C0063-54: Calibrating Yaw Rate For Vehicle Control Module (VCM) Not Implemented [Vehicle Control Module]: Outline

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.

DTC C0063:54 (VEHICLE CONTROL MODULE) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	Calibrating yaw rate for vehicle control module (VCM) not implemented
Detection condition	The vehicle control module (VCM) detects that the calibrating yaw rate for vehicle control module (VCM) is not performed for 50 s.
Fail-safe	(See DTC TABLE [VEHICLE CONTROL MODULE (US)] .)
Possible cause	Malfunction in CAN communication line between vehicle control module (VCM) and Sophisticated Airbag Sensor (SAS) control module Inappropriate Sophisticated Airbag Sensor (SAS) control module replacement procedure Inappropriate body control module (BCM) replacement procedure calibrating yaw rate for vehicle control module (VCM) not implemented Sophisticated Airbag Sensor (SAS) control module malfunction Vehicle control module (VCM) malfunction (built into body control module (BCM))
System wiring diagram	Not applicable
Connector diagram	Not applicable