Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2021 >> CX-3 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Dynamic Stability Control (Service Information)) >> DSC HU/Cm Removal/Installation >> DSC HU/CM Component Installation Note

DSC HU/CM Component Installation Note

WARNING: This page is about a different car, the 2016 Mazda CX-3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the DSC HU/CM component shown in the figure.
    Fig 1: Installing DSC HU/CM Component
    G10909726Courtesy of MAZDA MOTORS CORP.
  2. Install the cowl grill installation fastener. (See COWL GRILLE REMOVAL/INSTALLATION .)
scientia non olet · About Mike's Workshop Manuals