Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2021 >> CX-3 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Basic System - HVAC) >> Magnetic Clutch Disassembly/Assembly >> Snap Ring Removal/Installation Note

Snap Ring Removal/Installation Note

WARNING: This page is about a different car, the 2016 Mazda CX-3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove/install the snap ring using a snap ring pliers.
Fig 1: Removing Snap Ring Using Snap Ring Pliers
G10910248Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals