Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2021 >> CX-3 AWD >> Repair and Diagnosis >> Engine Performance >> System >> On-Board Diagnostic - Engine Control (3 Of 5) >> DTC P050B-00: Cold Start Ignition Timing Performance Problem >> Diagnostic Procedure

Diagnostic Procedure

DTC P050B:00 DIAGNOSTIC PROCEDURE

STEP INSPECTION RESULTS ACTION
1 IDENTIFY TRIGGER DTC FOR FREEZE FRAME DATA
  • Perform the Freeze Frame PID Data Access Procedure. (See ON-BOARD DIAGNOSTIC TEST .)
  • Is the DTC P050B:00 on FREEZE FRAME DATA?
 Yes Go to the next step.
No Go to the troubleshooting procedure for DTC on FREEZE FRAME DATA.
(See DTC TABLE .)
2 RECORD VEHICLE STATUS AT TIME OF DTC DETECTION TO UTILIZE WITH REPEATABILITY VERIFICATION
NOTE:
  • Recording can be facilitated using the screen capture function of the PC.
  • Record the FREEZE FRAME DATA/snapshot data on the repair order.
 - Go to the next step.
3 VERIFY RELATED REPAIR INFORMATION AVAILABILITY
  • Verify related Service Bulletins and/or online repair information availability.
  • Is any related repair information available?
 Yes Perform repair or diagnosis according to the available repair information.
  • If the vehicle is not repaired, go to the next step.
No Go to the next step.
4 VERIFY DTC TROUBLESHOOTING COMPLETED
  • Clear the DTC from the PCM memory using the M-MDS. (See AFTER REPAIR PROCEDURE .)
  • Leave the vehicle for 7 hours or more.
  • Start the engine and leave it idling for 1 min.
  • Perform the Pending Trouble Code Access Procedure. (See ON-BOARD DIAGNOSTIC TEST .)
  • Is the PENDING CODE for this DTC present?
 Yes Replace the PCM, then go to the next step.
(See PCM REMOVAL/INSTALLATION .)
No Go to the next step.
5 VERIFY AFTER REPAIR PROCEDURE Yes Go to the applicable DTC inspection.
(See DTC TABLE .)
No DTC troubleshooting completed.
scientia non olet · About Mike's Workshop Manuals