Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2021 >> 6 Touring >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Engine Control System (VIN Y)) >> Engine Oil Temperature Sensor Inspection >> Function inspection

Function inspection

WARNING: This page is about a different variant/trim than selected.
  1. Connect the M-MDS to the DLC-2.
  2. Switch the ignition ON (engine off).
  3. Display the PID OIL_TEMP. (See ON-BOARD DIAGNOSTIC TEST .) (See PCM INSPECTION .)
  4. Compare the voltage and temperature indications for the PID OIL_TEMP with the standard in the table indicated below.
scientia non olet · About Mike's Workshop Manuals