Down Light (With Down Light)

WARNING: This page is about a different car, the 2018 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
Remove the front map light. (See MAP LIGHT REMOVAL/INSTALLATION .)
Apply battery voltage to front map light terminal D, and connect terminal B to ground.

Fig 1: Applying Battery Voltage To Front Map Light Terminal D
Courtesy of MAZDA MOTORS CORP.
Verify that the LED turns on.
- If the LED does not turn on, replace the front map light. (See MAP LIGHT REMOVAL/INSTALLATION .)