Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2021 >> 6 Signature >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Instrumentation/Driver Info) >> Instrument Cluster Personalization Features Setting Procedure >> Turn And Hazard Indicator Alarm >> Using M-MDS

Using M-MDS

WARNING: This page is about a different car, the 2018 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the M-MDS (IDS) to DLC-2.
  2. After vehicle identification, select the following from the M-MDS initialization screen.
    1. "Module programming"
    2. "Programmable Parameters"
  3. Select menu in the "IC".
  4. Select an item name, and than select option.
    MAZDA MODULAR DIAGNOSTIC SYSTEM (M-MDS) DISPLAY FUNCTION INITIAL SETTING SETTING CONTENTS CONTROL UNIT
    Turn Signal Volume. The volume of the turn and hazard indicator alarm can be changed. High Low/High Instrument cluster
scientia non olet · About Mike's Workshop Manuals