Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2021 >> 6 Signature >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Instrumentation/Driver Info) >> Indicator Unit Inspection >> Led Illumination Inspection >> When Using M-MDS

When Using M-MDS

WARNING: This page is about a different car, the 2018 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the M-MDS to the DLC-2.
  2. After vehicle identification, select the following from the M-MDS initialization screen.
    1. "Data logger"
    2. "Module"
    3. "IC"
  3. Using the simulation function LCD_SEG, verify that the following warning/indicator lights are turned on.
    Fig 1: Warning/Indicator Lights
    G12237623Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals