Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2021 >> 6 Signature >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Front Suspension System) >> Front Shock Absorber And Coil Spring Removal/Installation >> Front Shock Absorber and Coil Spring Installation Note

Front Shock Absorber and Coil Spring Installation Note

WARNING: This page is about a different car, the 2018 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Set the front stabilizer control link aside before installing the front shock absorber and coil spring. Otherwise, the dust boot of the front stabilizer control link could be damaged.
  1. Set the front stabilizer control link aside so that it does not interfere with the servicing.
  2. Install the front shock absorber and coil spring.
scientia non olet · About Mike's Workshop Manuals