Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2021 >> 6 Signature >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (On-Board Diagnostic - Start Stop Unit) >> DTC B13D3-97: Remote Transmitter Registration Work Not Completed >> Notes

DTC B13D3-97: Remote Transmitter Registration Work Not Completed: Notes

WARNING: This page is about a different car, the 2018 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
DTC B13D3:97 (START STOP UNIT) DETECTION CONDITION AND POSSIBLE CAUSE

Description Remote Transmitter Registration Work Not Completed
Detection condition
  • Start stop unit detects that the registration of a remote transmitter has not been completed.
Fail-safe Not applicable
Possible cause
  • DTCs are stored in the immobilizer system.
  • Start stop unit configuration error
  • Remote transmitter registration not completed correctly.
  • Start stop unit malfunction
System wiring diagram Not applicable
scientia non olet · About Mike's Workshop Manuals