Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2021 >> 6 Signature >> Repair and Diagnosis >> Brakes >> Traction Control >> On-Board Diagnostics - Dynamic Stability Control >> DTC Inspection [Dynamic Stability Control (DSC)] >> CMDTC Self Test

CMDTC Self Test

  1. Connect the M-MDS to the DLC-2.
  2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
    1. Select "Self Test".
    2. Select "All CMDTCs".
  3. Verify the DTC according to the directions on the screen.
    • If any DTCs are displayed, perform troubleshooting according to the corresponding DTC inspection. (See DTC TABLE [DYNAMIC STABILITY CONTROL (DSC)] .)
      NOTE:
      • Snapshot data appears at the top of the help screen when the displayed DTC is selected.
      • Snapshot data stores the currently detected DTC data.
  4. After completion of repairs, clear all DTCs stored in the module. (See CLEARING DTC [DYNAMIC STABILITY CONTROL (DSC)] .)
scientia non olet · About Mike's Workshop Manuals