Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2021 >> 3 Premium, 4D Hatchback, FWD, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transaxle Shift Mechanism) >> Selector Lever Inspection

Selector Lever Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Switch the ignition ON (engine off or on).
  2. Perform the following procedures to inspect the selector lever.
    1. Verify that the selector lever can be operated as shown in the figure.
      G11279403Courtesy of MAZDA MOTORS CORP.
    2. Verify that the selector lever can be operated smoothly and moderately.
scientia non olet · About Mike's Workshop Manuals