Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2021 >> 3 Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle (Service Information) (ET6A-El) >> Drive Plate Removal/Installation >> Drive Plate Installation Bolts Installation Note

Drive Plate Installation Bolts Installation Note

  1. Set the SST against the drive plate.
    Fig 1: Drive Plate Bolts Tightening Sequence
    G13715720Courtesy of MAZDA MOTORS CORP.
  2. Tighten the new drive plate installation bolts uniformly in two or three steps in the order shown in the figure.
scientia non olet · About Mike's Workshop Manuals