Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2021 >> 3 Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 29 (Engine Cooling System (VIN M)) >> Coolant Reserve Tank Removal/Installation >> Notes

Coolant Reserve Tank Removal/Installation: Notes

WARNING: This page is about a different variant/trim than selected.
  1. Remove the hose and coolant reserve tank cap as a single unit.
  2. Remove in the order indicated in the table.
  3. Install in the reverse order of removal.
Fig 1: Coolant Reserve Tank Components With Torque Specification
G13713373Courtesy of MAZDA MOTORS CORP.
PART DESCRIPTION

1 Bracket
2 Coolant reserve tank
(See COOLANT RESERVE TANK INSTALLATION NOTE .)
scientia non olet · About Mike's Workshop Manuals