Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2021 >> 3 Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Exhaust System (VIN Y)) >> Exhaust System Removal/Installation >> Tunnel Member Installation Note

Tunnel Member Installation Note

WARNING: This page is about a different variant/trim than selected.
  1. Tighten bolt A shown in the figure to the specified torque.
    G13713889Courtesy of MAZDA MOTORS CORP.
  2. Tighten bolt B shown in the figure to the specified torque.
  3. Tighten the remaining bolts and nuts to the specified torque.
scientia non olet · About Mike's Workshop Manuals