Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2021 >> 3 Base >> Repair and Diagnosis >> Brakes >> Traction Control >> On-Board Diagnostics - Dynamic Stability Control (DSC) >> DTC C006B-00: TCS/DSC Control System [DSC HU/Cm] >> Diagnostic Procedure

Diagnostic Procedure

DTC C006B:00 (DSC HU/CM) DIAGNOSTIC PROCEDURE

Step Inspection Results Action
1 INSPECT DSC HU/CM FOR MALFUNCTION DEPENDING ON REPEATABILITY
  • Clear the DTC recorded in the memory. (See CLEARING DTC .)
  • Perform the DTC inspection for the DSC HU/CM. (See DTC INSPECTION .)
  • Is the same Pending DTC present?
 Yes Refer to the controller area network (CAN) malfunction diagnosis flow to inspect for a CAN communication error. (See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW (US) .)
If the CAN communication is normal, replace the DSC HU/CM and perform the repair completion verification.
(See DSC HU/CM REMOVAL/INSTALLATION [L.H.D. (US)] .)
No Go to the next step.
Repair completion verification VERIFY IF OTHER DTCs DISPLAYED
  • Perform the DTC inspection. (See DTC INSPECTION .)
  • Are any DTCs displayed?
 Yes Repair the malfunctioning location according to the applicable DTC troubleshooting.
No DTC troubleshooting completed.
scientia non olet · About Mike's Workshop Manuals