360° View Monitor Control Module Inspection

NOTE:

The integrity of the 360° view monitor control module cannot be determined from a single part. When inspecting the 360° view monitor control module, perform the following procedure.

Connect the M-MDS to the DLC-2.
Perform the DTC inspection for the 360° view monitor control module and verify if any DTCs related to the 360° view monitor control module is detected. (See DTC INSPECTION .)
- If DTCs are detected, repair the malfunctioning location according to the applicable DTC troubleshooting. (See DTC TABLE [360°VIEW MONITOR CONTROL MODULE (US)] .)