Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2020 >> CX-5 Signature >> Repair and Diagnosis >> External Pages >> Different car >> Section 304 (Intake Air System) >> Intake-Air System Removal/Installation >> Fresh-air Duct Installation Note

Fresh-air Duct Installation Note

WARNING: This page is about a different car, the 2020 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the fresh-air duct as shown in the figure.
    G11274489Courtesy of MAZDA MOTORS CORP.
  2. Connect the harness clip as shown in the figure.
    G11274487Courtesy of MAZDA MOTORS CORP.
  3. Install the following parts:
    1. Front combination light (RH) (See FRONT COMBINATION LIGHT REMOVAL/INSTALLATION .)
    2. Front bumper slider (RH) (See FRONT BUMPER SLIDER REMOVAL/INSTALLATION .)
    3. Front bumper (See FRONT BUMPER INSTALLATION .)
scientia non olet · About Mike's Workshop Manuals