Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2020 >> CX-30 Select, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Entertainment System >> Bluetooth® PAIRING PROCEDURE >> Introduction >> If Bluetooth®-enabled device is version 2.0

If Bluetooth®-enabled device is version 2.0

  1. Switch the ignition ON (engine off or on).
  2. Select "Settings" from the home screen of the center display as shown in the illustration.
  3. Select the following on the center display.
    1. [Connectivity Settings]
    2. [Bluetooth]
    3. Bluetooth setting ON
    4. [Pair New Device]
  4. Verify that the 4-digit pairing code (initial value "0000") is indicated in the center display.
  5. Input the 4-digit pairing code indicated in the center display into the Bluetooth®-enabled device.
    NOTE:
    • After inputting the 4-digit pairing code, the connectivity master unit (CMU) initiates the pairing programming with the Bluetooth®-enabled device.
  6. Verify that "Pairing complete Connection complete" is indicated in the center display.
scientia non olet · About Mike's Workshop Manuals