Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2020 >> CX-30 Select, AWD >> Repair and Diagnosis >> Engine Performance >> System >> On-Board Diagnostic - Engine Control System (3 Of 4) >> DTC P130C-00: Pre-Ignition Detected >> Outline

DTC P130C-00: Pre-Ignition Detected: Outline

DTC P130C:00 (PCM, SKYACTIV-G) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location Pre-ignition detected
Detection condition
  • Pre-ignition is detected a few times continuously with the engine coolant temperature at 80°C {176°F} or more.
Fail-safe
  • Not applicable
Possible cause
  • Fuel having octane rating lower than specified fuel is used
  • Carbon accumulated in combustion chamber
  • PCM malfunction
System wiring diagram
  • Not applicable
Connector diagram
  • Not applicable