DTC C1A67-54: Front Radar Sensor Aiming Adjustment Not Implemented [Vehicle Control Module]: Outline
DTC C1A67:54 (VEHICLE CONTROL MODULE) DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
Front radar sensor aiming adjustment not implemented |
| Detection condition |
- The vehicle control module (VCM) detects that the front radar sensor aiming adjustment was not implemented.
|
| Fail-safe |
(See DTC TABLE [VEHICLE CONTROL MODULE (US)]
.) |
| Possible cause |
- Front radar sensor aiming adjustment malfunction (aiming adjustment not implemented)
- Front radar sensor malfunction
- Vehicle control module (VCM) malfunction (built into body control module (BCM))
- Front radar sensor which was used on a different vehicle is installed.
NOTE:
- If the ignition is switched OFF in the middle of aiming, the front radar sensor may detect a DTC even if the front radar sensor power supply voltage is stable.
|
| System wiring diagram |
Not applicable |
| Connector diagram |
Not applicable |