Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2020 >> CX-3 AWD >> Repair and Diagnosis >> Engine Performance >> System >> On-Board Diagnostic - Engine Control (2 Of 5) >> DTC P0196-00: Engine Oil Temperature Sensor Circuit Range/Performance Problem >> Details On DTCs

Details On DTCs

DTC P0196:00 DETECTION CONDITION AND POSSIBLE CAUSE

DESCRIPTION Engine oil temperature sensor circuit range/performance problem
DETECTION CONDITION Determination conditions
  • During the 10 min after the engine is started, the engine oil temperature does not increase above 0.9°C {34°F}.
Preconditions
  • Before starting the engine, leave the vehicle with the engine turned off for 6 hours or more.
  • The following DTCs are not detected:
    • engine oil temperature sensor: P0197:00, P0198:00
Drive cycle
  • 1
Self test type
  • CMDTC self test
Sensor used
  • Engine oil temperature sensor
FAIL-SAFE FUNCTION
  • Not applicable
VEHICLE STATUS WHEN DTCs ARE OUTPUT
  • Illuminates check engine light.
POSSIBLE CAUSE
  • Engine oil leakage
  • Engine oil temperature sensor/engine oil pressure sensor connector or terminals malfunction
  • PCM connector or terminals malfunction
  • Engine oil temperature sensor loose
  • Engine oil temperature sensor malfunction
  • Use of unspecified engine oil
  • PCM malfunction