Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2020 >> 3 Base, 4D Hatchback, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Fuel System (VIN L)) >> Fuel Tank Removal/Installation >> Joint Hose Installation Note

Joint Hose Installation Note

WARNING: This page is about a different variant/trim than selected.
  1. Align the joint hose marking with the pipe marking as shown in the figure and assemble.

    Fuel tank side 

    G13174993Courtesy of MAZDA MOTORS CORP.
  2. Align the joint hose marking with the fuel-filler pipe marking as shown in the figure and assemble.

    Fuel-filler pipe side 

    G13174994Courtesy of MAZDA MOTORS CORP.