Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2019 >> CX-9 Signature >> Repair and Diagnosis >> Transmission >> Automatic Trans >> On-Board Diagnostics - Transaxle >> DTC P0721-00: Output Shaft Speed Sensor/Sensor Output Range Malfunction (TCM) >> Notes

DTC P0721-00: Output Shaft Speed Sensor/Sensor Output Range Malfunction (TCM): Notes

DTC P0721:00 - TCM (GW6A-EL, GW6AX-EL) DETECTION CONDITION AND POSSIBLE CAUSE

DTC P0721:00 Output shaft speed sensor/sensor output range malfunction
DETECTION CONDITION  
  • Under the following condition, the output shaft speed is 13, 560 RPM or more in forward or 2, 000 RPM or more in reverse for a continuous 1 s:
    • Battery voltage is 8 V or more.
FAIL-SAFE FUNCTION  
  • Inhibits learning control.
  • Inhibits manual mode.
  • Inhibits neutral idle control.
  • Inhibits AAS.
POSSIBLE CAUSE  
  • Output shaft speed sensor malfunction
SYSTEM WIRING DIAGRAM Not applicable
scientia non olet · About Mike's Workshop Manuals