Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2019 >> CX-9 Signature >> Repair and Diagnosis >> Brakes >> Traction Control >> On-Board Diagnostics - Dynamic Stability Control HM/Cm >> DTC U0420-00/U0420-82/U0420-83: Signal Error From EPS Control Module [DSC HU/Cm] >> Diagnostic Procedure

Diagnostic Procedure

DTC U0420:00/U0420:82/U0420:83 (DSC HU/CM) DIAGNOSTIC PROCEDURE

Step Inspection Action
1 VERIFY EPS CONTROL MODULE DTC
Yes Go to the applicable DTC inspection.
(See DTC TABLE [ELECTRIC POWER STEERING (EPS)] .)
DTC troubleshooting completed, then go to the next step.
No Go to the next step.
2 VERIFY DTC TROUBLESHOOTING COMPLETED
Yes Repeat the inspection from Step 1. If the malfunction recurs, replace the steering column, then go to the next step.
(See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION .)
No Go to the next step.
3 VERIFY NO DTC IS PRESENT
  • Are any DTCs present?
Yes Go to the applicable DTC inspection.
(See DTC TABLE [DSC HU/CM] .)
No DTC troubleshooting completed.