DTC U3000-4A: DSC HU/Cm Mismatched Installation: Notes

DTC U3000:4A (DYNAMIC STABILITY CONTROL (DSC)) DETECTION CONDITION AND POSSIBLE CAUSE

DTC	U3000:4A	DSC HU/CM Mismatched Installation
DETECTION CONDITION		Detection of situation where vehicle-type input signal and DSC HU/CM information remains incongruent through CAN information
FAIL-SAFE FUNCTION		Refer to "Fail-safe Function Malfunction Contents". (See DTC TABLE (DYNAMIC STABILITY CONTROL (DSC)) .)
POSSIBLE CAUSE		Mismatched installation of DSC HU/CM Instrument cluster configured improperly.
SYSTEM WIRING DIAGRAM		Not applicable