| DETECTION CONDITION |
- When any of the following conditions is met:
- CAN communication line malfunction between EPS control module and PCM
- EPS control module internal malfunction
Diagnostic support note
- This is a continuous monitor (other).
- The check engine light does not illuminate.
- FREEZE FRAME DATA is not available.
- Snapshot data is available.
- DTC is stored in the PCM memory.
|
| FAIL-SAFE FUNCTION |
Not applicable |
| POSSIBLE CAUSE |
- CAN drive error (EPS control module or PCM)
- CAN communication line malfunction between EPS control module and PCM
- EPS control module terminal 2B-PCM terminal 2AK
- EPS control module terminal 2C-PCM terminal 2AL
- EPS control module connector or terminals malfunction
- PCM connector or terminals malfunction
- EPS control module malfunction
- PCM malfunction
|
 Courtesy of MAZDA MOTORS CORP.
|