DTC U0402-68: Signal Error From TCM: Notes

WARNING: This page is about a different variant/trim than selected.

DTC U0402:68 (Electronic AWD Control System) DETECTION CONDITION AND POSSIBLE CAUSE

DTC U0402:68	Signal Error From TCM
DETECTION CONDITION	The instrument cluster received error signals from the transaxle for 5 s with the ignition switched ON (engine off or on).
FAIL-SAFE FUNCTION	Refer to "Fail-safe function table". (See DTC TABLE (Electronic AWD Control System) .)
POSSIBLE CAUSE	The transaxle could not send a normal signal temporarily. (DTCs are stored in the TCM.) TCM malfunction Instrument cluster malfunction
SYSTEM WIRING DIAGRAM	-