Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2018 >> CX-5 Touring, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> On-Board Diagnostics - Automatic Transaxle >> DTC P0716-00: Turbine/Input Shaft Speed Sensor Range/Performance Problem >> Notes

DTC P0716-00: Turbine/Input Shaft Speed Sensor Range/Performance Problem: Notes

DTC P0716:00 TCM (FW6A-EL, FW6AX-EL) DETECTION CONDITION AND POSSIBLE CAUSE

DTC P0716:00 Turbine/Input Shaft Speed Sensor Range/Performance Problem
DETECTION CONDITION
  • Under the following condition, the turbine/input shaft speed is 9, 000 rpm or more for 1 s:
    • Battery voltage is 8 V or more.
FAIL-SAFE FUNCTION
  • Set to TCC control
  • Inhibits learning control
  • Inhibits manual mode
  • Inhibits neutral idle control
  • Inhibits AAS
  • Inhibits 5GR and 6GR
  • Inhibits shift down when the accelerator pedal is depressed.
POSSIBLE CAUSE
  • Turbine/input shaft speed sensor malfunction
SYSTEM WIRING DIAGRAM Not applicable
scientia non olet · About Mike's Workshop Manuals