Diagnostic Procedure

DTC U3000:49 (SAS Control Module (Two-step Deployment Control System - US/Canada Spec.)) DIAGNOSTIC PROCEDURE

Step	Inspection		Action
1	PERFORM SAS CONTROL MODULE DTC INSPECTION Clear the DTC for the SAS control module using the M-MDS. (See CLEARING DTC (SAS Control Module (Two-step Deployment Control System - US/Canada Spec.)) .) Perform the DTC inspection for the SAS control module using the M-MDS. (See DTC INSPECTION (SAS Control Module (Two-step Deployment Control System - US/Canada Spec.)) .) Are the same DTCs present?	Yes	Repeat the inspection from Step 1. If the malfunction recurs, replace the SAS control module. (See SAS CONTROL MODULE REMOVAL/INSTALLATION [TWO-STEP DEPLOYMENT CONTROL SYSTEM - US/CANADA SPEC.] .)
		No	DTC troubleshooting completed.