Diagnostic Procedure
DTC C006B:00/C0072:68 (DYNAMIC STABILITY CONTROL) DIAGNOSTIC PROCEDURE
| STEP | INSPECTION | ACTION | |
|---|---|---|---|
| 1 | VERIFY THAT THE SAME DTC IS NOT PRESENT
|
Yes | Replace the DSC HU/Control Module, then go to the next step. (See DSC HU/Control Module REMOVAL/INSTALLATION [SKYACTIV-G 2.5 (WITH CYLINDER DEACTIVATION)] .) |
| No | Go to the next step. | ||
| 2 | VERIFY THAT NO OTHER DTCS ARE PRESENT
|
Yes | Go to the applicable DTC inspection. (See DTC TABLE (Dynamic Stability Control (DSC)) .) |
| No | DTC troubleshooting completed. | ||