Selection Of Procedure For Immobilizer System-related Parts Programming

Verify that the ROOM fuse, AT fuse, and SRS2/ESCL fuse are installed.

Select the applicable programming procedure from the service content of the immobilizer system-related parts.

PROGRAMMING PROCEDURE TYPES FOR IMMOBILIZER SYSTEM-RELATED PARTS DESCRIPTION

No.

Service

Programming Procedure

1

When programming additional remote transmitter ⁽¹⁾

(See No. 1 Additional Remote Transmitter Programming Procedure (Using the M-MDS) .)

2

When PCM is replaced

(See No. 2 Programming Procedure After PCM Replacement .)

3

When start stop unit is replaced
When PCM and start stop unit are replaced simultaneously

(See No. 3 Programming Procedure When Start Stop Unit Is Replaced Or When Start Stop Unit And Pcm Are Replaced Simultaneously .)

4

When remote transmitter is replaced
When remote transmitter is lost

(See No. 4 Procedure For Remote Transmitter Clearing And Newly Programming .)

⁽¹⁾	Have a remote transmitter that can start the engine.