Active Command Modes Table (Front Body Control Module (FBCM))
ACTIVE COMMAND MODES (Front Body Control Module (FBCM))
| Simulation Item |
Unit/Operation |
Data Contents |
Output Part Name |
| DEFOG_R_ST |
Off/On |
- Off: Stops rear window defogger.
- On: Operates rear window defogger.
|
Filament |
| ESS_ST |
NOTE:
- Displays in the M-MDS but it does not operate.
|
| F_FOG_LMP |
Off/On |
- Off: Turns off front fog light.
- On: Illuminates front fog light.
|
Front fog light |
| H/L |
OFF/DRL/TNS/H/L_LOW/H/L_HI |
- OFF: Turns off headlight.
- DRL: Illuminates DRL.
- TNS: Illuminates TNS (parking lights).
- H/L_LOW: Illuminates headlight LO.
- H/L_HI: Illuminates headlight HI.
|
- Headlight LO/HI
- Parking light
- Taillight
- License plate light
- DRL
|
| H/L_CLN_RY |
NOTE:
- Displays in the M-MDS but it does not operate.
|
| HAZARD_LMP |
Off/On |
- Off: Turns off hazard warning light.
- On: Flashes hazard warning light.
|
- Front turn light
- Side turn light
- Rear turn light
|
| PTC_HEAT_ST |
0%/10%/20%/30%/40%/50%/60%/70%/80% |
- 0%: Stops PTC heater output.
- 10%: Controls PTC heater output level to 10%.
- 20%: Controls PTC heater output level to 20%.
- 30%: Controls PTC heater output level to 30%.
- 40%: Controls PTC heater output level to 40%.
- 50%: Controls PTC heater output level to 50%.
- 60%: Controls PTC heater output level to 60%.
- 70%: Controls PTC heater output level to 70%.
- 80%: Controls PTC heater output level to 80%.
|
PTC heater |
| WAS_MT_RY_F |
Off/On |
- Off: Turns front washer motor relay off.
- On: Turns front washer motor relay on.
|
Front body control module (FBCM) |
| WAS_MT_RY_R |
Off/On |
- Off: Turns rear washer motor relay off.
- On: Turns rear washer motor relay on.
|
Front body control module (FBCM) |