Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2018 >> CX-3 Touring, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> On-Board Diagnostics - Transaxle >> DTC P0721-00; Output Shaft Speed Sensor/Sensor Output Range Malfunction >> Notes

DTC P0721-00; Output Shaft Speed Sensor/Sensor Output Range Malfunction: Notes

DTC P0721-00; OUTPUT SHAFT SPEED SENSOR/SENSOR OUTPUT RANGE MALFUNCTION - DETECTION CONDITION & POSSIBLE CAUSE

DTC P0721:00 Output shaft speed sensor/sensor output range malfunction
DETECTION CONDITION
  • Under the following condition, the output shaft speed is 13, 560 RPM or more in forward or 2, 000 RPM or more in reverse for a continuous 1 s:
    • Battery voltage is 8 V or more.
FAIL-SAFE FUNCTION
  • Inhibits learning control.
  • Inhibits manual mode.
  • Inhibits neutral idle control.
  • Inhibits AAS.
POSSIBLE CAUSE
  • Output shaft speed sensor malfunction
SYSTEM WIRING DIAGRAM Not applicable
scientia non olet · About Mike's Workshop Manuals