Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2018 >> CX-3 Touring, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 218 (Entertainment System) >> Bass-Box Removal/Installation

Bass-Box Removal/Installation

WARNING: This page is about a different car, the 2018 Mazda CX-9. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the trunk covering. (See TRUNK COVERING REMOVAL/INSTALLATION .)
  3. Remove the trunk board. (See TRUNK BOARD REMOVAL/INSTALLATION .)
  4. Remove the bolt.
    Fig 1: Locating Bass-Box And Connector
    G12266881Courtesy of MAZDA MOTORS CORP.
  5. Disconnect the connector.
  6. Remove the bass-box.
  7. Install in the reverse order of removal.
scientia non olet · About Mike's Workshop Manuals