Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2018 >> CX-3 Touring, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 134 (Lighting System) >> Back-up Light Switch Inspection

Back-up Light Switch Inspection

WARNING: This page is about a different car, the 2018 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the back-up light switch.
  2. Verify that the continuity between the back-up light switch terminals is as indicated in the table.
    Fig 1: Back-Up Light Switch Connector Terminals
    G09788187Courtesy of MAZDA MOTORS CORP.
    Fig 2: Back-Up Light Switch Terminals Continuity Chart
    G09788186Courtesy of MAZDA MOTORS CORP.
    • If not as indicated in the table, replace the back-up light switch.
scientia non olet · About Mike's Workshop Manuals