DTC B00D5-55: Configuration Setting Error (Pad Indicator Structural Malfunction): Notes

WARNING: This page is about a different car, the 2018 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.

DTC B00D5:55 (SAS Control Module (Two-step Deployment Control System - US/Canada Spec.)) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	Configuration setting error (PAD indicator structural malfunction)
Detection condition	WARNING: Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure. SAS control module configuration setting has not been done correctly Parts which have not been set to SAS control module are assembled
Fail-safe	Not applicable
Possible cause	SAS control module configuration setting not implemented SAS control module configuration setting invalid Indicator unit assembly incorrect SAS control module malfunction
System wiring diagram	Not applicable