Mass Air Flow (MAF) Sensor/Intake Air Temperature (IAT) Sensor NO. 1 Removal/Installation

WARNING: This page is about a different car, the 2018 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Because the IAT sensor No. 1 is integrated in the MAF sensor, replacing the IAT sensor No. 1 includes replacement of the MAF sensor/IAT sensor No. 1.

Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
Disconnect the MAF sensor/IAT sensor No. 1 connector.
Remove the MAF sensor/IAT sensor No. 1.

Fig 1: MAF Sensor/IAT Sensor No. 1 And Screws
Courtesy of MAZDA MOTORS CORP.
- Install in the reverse order of removal.