Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2018 >> CX-3 Sport, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> On-Board Diagnostics - Transaxle >> DTC P0716-00; Turbine/Input Shaft Speed Sensor Range/Performance Problem >> Notes

DTC P0716-00; Turbine/Input Shaft Speed Sensor Range/Performance Problem: Notes

DTC P0716-00; TURBINE/INPUT SHAFT SPEED SENSOR RANGE/PERFORMANCE PROBLEM - DETECTION CONDITION & POSSIBLE CAUSE

DTC P0716:00 Turbine/input shaft speed sensor range/performance problem
DETECTION CONDITION
  • Under the following condition, the turbine/input shaft speed is 9, 000 RPM or more for 1 s:
    • Battery voltage is 8 V or more.
FAIL-SAFE FUNCTION
  • Set to TCC control.
  • Inhibits learning control.
  • Inhibits manual mode.
  • Inhibits neutral idle control.
  • Inhibits AAS.
  • Inhibits 5GR and 6GR.
  • Inhibits shift down when the accelerator pedal is depressed.
POSSIBLE CAUSE
  • Turbine/input shaft speed sensor malfunction
SYSTEM WIRING DIAGRAM Not applicable
scientia non olet · About Mike's Workshop Manuals