Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2018 >> 6 Signature >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Control System (VIN 5)) >> Clutch Stroke Sensor Inspection >> PID/DATA Monitor Inspection

PID/DATA Monitor Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Connect the M-MDS to the DLC-2.
  2. Switch the ignition ON (engine off).
  3. Verify that the clutch pedal position (PID: CPP) input from the clutch stroke sensor is within the standard when the clutch pedal is depressed. (See ON-BOARD DIAGNOSTIC TEST .) (See PCM INSPECTION .)
scientia non olet · About Mike's Workshop Manuals