Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2018 >> 6 Signature >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 31 (Manual Transaxle (Service Information)) >> Neutral Switch Removal/Installation

Neutral Switch Removal/Installation

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the following parts as a single unit. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION .)
    • Air cleaner cover
    • Air cleaner element
    • Fresh-air duct
    • Air cleaner case
    • Air hose
    • Resonance chamber
  3. Remove in the order indicated in the table.
  4. Install in the reverse order of removal.
Fig 1: Neutral Switch Components With Torque Specification
G12231505Courtesy of MAZDA MOTORS CORP.
COMPONENT DESCRIPTION

1 Connector
2 Neutral switch
3 Gasket