Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2017 >> MX-5 Miata Club, Automatic Trans >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> On-Board Diagnostic - Engine Controls (Introduction & DTCS (1 Of 5)) >> DTC B10A2-00; Vehicle Collision SAS Control Module Is Received >> Repeatability Verification Procedure

Repeatability Verification Procedure

  1. Switch the ignition ON and leave for 5 s or more.
  2. Clear the DTC from the PCM memory using the M-MDS. (See CLEARING DTC [PCM (SKYACTIV-G 2.0)] ).
  3. After switching the ignition off, switch the ignition back ON and leave for5 s or more.
  4. Using the M-MDS, display DTCs and verify that DTC U0151:00 is not displayed. (See ON-BOARD DIAGNOSTIC TEST [PCM (SKYACTIV-G 2.0)] ).
scientia non olet · About Mike's Workshop Manuals